Clean Install start

So here are the results:

zuerst XBench 1.0 mit meinem alten 10.2.4er System:

Results 40.09
System Info
Xbench Version 1.0
System Version 10.2.4
Physical RAM 128 MB
Model PowerBook3,1
Processor PowerPC 750 @ 500 MHz
L1 Cache 32K (instruction), 32K (data)
L2 Cache 1024K @ 200 MHz
Bus Frequency 100 MHz
Video Card ATY,RageM3
Drive Type TOSHIBA MK2016GAP
CPU Test 56.02
GCD Recursion 51.59 2.01 Mops/sec
Floating Point Basic 46.12 155.43 Mflop/sec
Floating Point Library 80.12 3.60 Mops/sec
Thread Test 38.78
Computation 32.28 260.06 Kops/sec, 4 threads
Lock Contention 48.57 609.67 Klocks/sec, 4 threads
Memory Test 29.95
System 27.74
Allocate 89.55 30.19 Kalloc/sec
Fill 32.42 185.89 MB/sec
Copy 15.12 75.62 MB/sec
Stream 32.53
Copy 32.64 142.74 MB/sec
Scale 32.68 142.57 MB/sec
Add 31.85 144.90 MB/sec
Triad 32.97 144.85 MB/sec
Quartz Graphics Test 51.31
Line 42.41 1.08 Klines/sec [50% alpha]
Rectangle 60.53 4.26 Krects/sec [50% alpha]
Circle 61.39 1.42 Kcircles/sec [50% alpha]
Bezier 41.47 450.65 beziers/sec [50% alpha]
Text 59.03 962.14 chars/sec
OpenGL Graphics Test 48.37
Spinning Squares 48.37 33.85 frames/sec
User Interface Test 53.00
Elements 53.00 18.03 refresh/sec
Disk Test 25.95
Sequential 24.35
Uncached Write 19.88 8.68 MB/sec [4K blocks]
Uncached Write 21.30 8.67 MB/sec [256K blocks]
Uncached Read 55.29 8.71 MB/sec [4K blocks]
Uncached Read 20.43 8.81 MB/sec [256K blocks]
Random 27.78
Uncached Write 19.11 0.29 MB/sec [4K blocks]
Uncached Write 26.13 5.99 MB/sec [256K blocks]
Uncached Read 45.53 0.30 MB/sec [4K blocks]
Uncached Read 31.84 6.24 MB/sec [256K blocks]

Jetzt nach dem Clean Install:

Results 40.75
System Info
Xbench Version 1.0
System Version 10.2.4
Physical RAM 128 MB
Model PowerBook3,1
Processor PowerPC 750 @ 500 MHz
L1 Cache 32K (instruction), 32K (data)
L2 Cache 1024K @ 200 MHz
Bus Frequency 100 MHz
Video Card ATY,RageM3
Drive Type TOSHIBA MK2016GAP
CPU Test 54.21
GCD Recursion 47.78 1.87 Mops/sec
Floating Point Basic 45.82 154.43 Mflop/sec
Floating Point Library 79.46 3.57 Mops/sec
Thread Test 39.27
Computation 32.26 259.87 Kops/sec, 4 threads
Lock Contention 50.17 629.81 Klocks/sec, 4 threads
Memory Test 29.28
System 26.67
Allocate 87.67 29.56 Kalloc/sec
Fill 29.03 166.45 MB/sec
Copy 15.01 75.05 MB/sec
Stream 32.44
Copy 32.60 142.58 MB/sec
Scale 32.57 142.12 MB/sec
Add 31.77 144.54 MB/sec
Triad 32.85 144.33 MB/sec
Quartz Graphics Test 55.18
Line 48.84 1.24 Klines/sec [50% alpha]
Rectangle 55.76 3.92 Krects/sec [50% alpha]
Circle 59.69 1.38 Kcircles/sec [50% alpha]
Bezier 57.44 624.11 beziers/sec [50% alpha]
Text 55.45 903.88 chars/sec
OpenGL Graphics Test 45.30
Spinning Squares 45.30 31.70 frames/sec
User Interface Test 48.82
Elements 48.82 16.61 refresh/sec
Disk Test 30.26
Sequential 31.42
Uncached Write 25.82 11.27 MB/sec [4K blocks]
Uncached Write 27.46 11.17 MB/sec [256K blocks]
Uncached Read 71.18 11.21 MB/sec [4K blocks]
Uncached Read 26.24 11.32 MB/sec [256K blocks]
Random 29.19
Uncached Write 18.63 0.28 MB/sec [4K blocks]
Uncached Write 30.39 6.97 MB/sec [256K blocks]
Uncached Read 45.48 0.30 MB/sec [4K blocks]
Uncached Read 35.13 6.89 MB/sec [256K blocks]

Also laut XBench tut sich nicht viel aber, wenn man sich die Ergebnisse von CocoaBench anschaut (erste Spalte: nur System; zweite Spalte: alles drauf)

CocoaBench 8.12 7.20
Number Crunching 9.54 9.58
Image Proccesing 8.59 6.08
I/O 4.81 3.57

Hier sieht man den Anfangszustand, der deutlich fixer war in den ersten Zahlen. Ich muß mal schauen was das ursprüngliche System hatte - aber ich meine mich an ca. 6.2 als Gesamtwertung zu erinnern.

Also hätte es schon einen Effekt gehabt, außerdem fühlt es sich schneller an.

Gruß

MacELCH